Magnetic Broach Cutters

MDS-BRC 50

50MM Magnetic Broach Cutter

 

Specifications

MDS-BRC 50

Motor power 1100 W
Magnetic Holding Force 19500 N
Magnetic Pole 2 Poles High Frequency
Base Foot Print 240 x 125 mm
Magnetic Surface Epoxy Sealed
Broach Cutter Capacity 50 mm D x 50 mm L
Drilling Dia in Steel (MT2) 23 mm
Maximum Stroke 315 mm
Working Stroke 150 mm
Full Load Speed 350 rpm
Rated Input 100 W
Approx. Net Wt. 30 kgs.
Min. thickness of MS plate that can be drilled 10 mm
 

MDS-BRC 62

62MM Magnetic Broach Cutter

 

Specifications

MDS-BRC 62

Motor power 1100 W
Magnetic Holding Force 19500 N
Magnetic Pole 2 Poles High Frequency
Base Foot Print 240 x 125 mm
Magnetic Surface Epoxy Sealed
Broach Cutter Capacity 62 mm D x 50 mm L
Drilling Dia in Steel (MT3) 31 mm
Maximum Stroke 315 mm
Working Stroke 150 mm
Full Load Speed 270 rpm
Rated Input 100 W
Approx. Net Wt. 32 kgs.
Min. thickness of MS plate that can be drilled 10 mm
 

Comparison of
Broach Cutter Versus Regular Drill

Broach Cutter only cuts a slot hence cutting work is shortened by one third.
The remaining core is a solid cylinder which has more value than mere chips.
Regular Drill cuts the entire hole hence it uses up to 3-5 times greater working time.
Finally the chips are formed which has less scrap value than solid cylinder.
 

 
Two epoxy sealed high frequency electro magnet poles Dial for precision adjustment of working stroke
   
v type slide for elongated life Cap to protect spillage of water or coolant while topping up
 

 

Comparative Performance

Size mm Regd. Drill Broach Cutter Slug Dia.
22 100% 60% 14 mm
28 100% 48% 20 mm
40 100% 30% 32 mm
50 100% 26% 42 mm
60 100% 17% 52 mm
 
      Print Page TOP
         
         
Double-Insulation Variable-Speed Reverse-&-Forward Carry-Case Spindle-Lock
• All Specifications are subject to change without Prior notice or any obligation on the part of Nippon
• Accessories shown in the picture may not be a part of actual equipments.
• Product pictures showed here are as true as possible but not binding.